Unior

• For: Suntour

• Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting • Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear...

• The head set cup remover makes removal of cups 1-1/4" and 1-1/2" from the frame quick and easy • Suitable for removing PressFit 30 (PF30) bottom bracket cups. PF30 bottom bracket cups are pressed...

• For removing hub end caps while servicing the hubs or converting them to different standards • Thanks to the expanding mechanism, which grabs the hub cap evenly from the inside, even the most...

• Set includes 6 pcs of arm for inner bearing dimensions 6.5-8,10-12, 12-15, 17-20, 22-28, 30-36 • Used for pulling different types of bearings. The bearing is gripped from the inside side and pulled...

• Material: premium chrome vanadium steel

• Also for clenching and separating of from cables and other sensitive objects • Serrated gripping surface • Cutting edges induction hardened

• Use the magnetizer to magnetise the screwdriver’s tip so that the screws stick to the tip. • The tip can be demagnetised by pushing the tip and the shaft into the magnetizer’s opening marked with...

• Compatible with chains from 6–12-speeds. Including: SRAM AXS flat top chain, Campagnolo 11- and 12-speed chain peening, and most single speed 1/8? chains • Includes: Long and short derailleur chain...

• The smaller end is used for nipples with a 6.4mm outside diameter, while the larger end is used for assembling and disassembling for tubeless Mavic rim inserts.

• Metal tire levers are used on wheels where mounting and dismounting the tires with plastic tire levers is difficult or impossible. • Can be stuck behind the spoke, with help of the hook on the end...

• This chain tool can cover anything from 5 to 11 speed • Its handle doubles in function as a valve core remover for Schrader and Presta valves

• A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.

• Used to remove and install Shimano® Hollowtech II, Campagnolo® Ultra-Torque and Power Torque, Race Face®, FSA®, SRAM®, Truvativ®, Chris King® bottom brackets as well as many and others. The...

• Precise design and hardened to stay sharp. 1695.1 is used to restore existing pedal threads and is available in set (left and right).

• The conically shaped tip of the tool is designed to slide between the pads inside the caliper and spread the pads by pushing pistons back into the caliper. • Tool is bent 30° for easier access to...

• Supports hubs up to 157 mm width • 2.3kg • Center wheels with dimension from 16 to 29 inch, with or without tire

• The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.

• Quickly and accurately determine the wear and stretch of any chain

• Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position

• Repair bike stand with two clamps is designed for service workshops and more demanding users. • Does not include base plate • Stand is adjustable by height between 947 and 1570mm • Replaceable...

• Repair bike stand is designed for service workshops and everyday use. • Stand is adjustable by height between 947 and 1570mm • Replaceable rubber jaw covers, item 1693.11

• Quick release system enables the mechanic to close the jaws by hand, at which point clamp already grips the seat post or frame with sufficient force to hold the bicycle in place. Rotate the handle...

• The spoke wrench is designed to tighten nipples with flat diameters of 3.3mm

• Long ball end hexagon wrench, sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 mm • TX profile wrench, size T25 • Crank cap tool • Chain tool • Round spoke wrench • Set of two tire levers • Crosstip screwdriver...

• Accepts wheels from 16 to 29 inch with or without tire • Supports hubs up to 157 mm width. Truing of 20 mm or other dimension axle wheels requires additional adaptors. • The calipers enable...

• Freshen things up a bit by replacing those worn out covers

• Brake caliper is used on the 1689 professional wheel centering stand.

• Designed to cut tire treads and was developed specifically for MTB tires • Height adjustment slider, which enables cutting of each tread on the same height and therefore making the custom tire the...

• Threading nipples to the spokes is the most time consuming part of building wheels. Thanks to the speed nipple bit you can now do it with the cordless screwdriver, save yourself some time and still...

• Spoke wrenches are designed to tighten nipples with flat diameter 3.3 mm to 3.45 mm

• For dimensions: 1", 1-1/4", 1-1/8", 1-1/2" • Enables fast and precise determination of steering tube length desired after the cut

• Bushing extractor set sizes 12 mm and 12.7 mm • Fork seal driver tool for fork sliders sizes 30, 32, 34, 35/36 and 40 mm • Hex wrenches sizes 3/64", 1/16", 1.5, 2, 2.5 and 3 • 1/2" sockets sizes...

• Material: premium chrome vanadium steel

• Blade chrome plated, black anodised tip • Handle – polypropylene

• Set of 2 taps ITAL 36 ? 24 TPI

• Steel plates welded on to the jaws to help massage the tire into place • Also for fast straightforward tire removal - especially tires that have already bonded with the rim • Shape of the pliers...

• Long ball end hexagon wrench, sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 mm • TX profile wrench, size T25 • Crank cap tool • Chain tool, together with tire valve tool • Round spoke wrench • Set of two tire...