RAM Mounting Systems

RAM 9" Long Lower Female Tele-PoleThe RAM Tele-Pole 9" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill and Drill plate bases, as well as RAM-VP-TTMXX...

RAM Adapt-a-Post 11" Extension PoleVersatility. That one word sums up what you get when you purchase RAM products. For Kayaks, versatility is key since space is always at a premium. Whether it's to...

RAM Adapt-A-Post 9" Extension PoleVersatility. That one word sums up what you get when you purchase RAM products. For Kayaks, versatility is key since space is always at a premium. Whether it's to...

Adapt-A-Post™ 15" Extension PoleVersatility. That one word sums up what you get when you purchase RAM products. For kayaks, versatility is key since space is always at a premium. Whether it's...

Adjust-A-Pole Riser for Vehicle Laptop MountsThe RAM Adjust-A-Pole™ allows the installer to perfectly position a Tele-Pole™ assembly around any obstruction. The dual pivot point...

B Size 1" Fishfinder Ball Adapter for the Lowrance Hook2 SeriesDesigned for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory...

RAM® Ball Adapter with 1/4" - 20" Threaded Hole and Hex Post - C SizeThe RAM-337U includes a 1/4"-20 female thread hex hole connected to a 1.5" rubber ball.Specifications:Thread Pitch (inch):...

RAM 1.5" Diameter Ball Mount with Long Double Socket Arm & 2 2.5" Round Bases w/AMPs Hole PatternThe RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the...

The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost...

The powder coated marine grade aluminum base contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center,...

RAM Base & Ball w/Garmin Mounting HardwareRAM-202-G2 universal base consists of a 1.5 inch diameter rubber ball, connected at right angles to a 2.5 inch diameter round base. The base has pre-drilled...

RAM Yoke Clamp Base with 1" Rubber Ball The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when...

Double Socket Swivel ArmSpecifications:Ball/Socket Size: C Size (1")Weight Capacity: 2 lbsMaterials: High strength compositeWeight: 0.65 lbs. Manufacturer : RAM Mounting Systems Manufacturer Part No...

Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole PatternThe RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that will accept 1" ball bases...

RAM 1" Diameter Ball with 1/4-20 Stud for Cameras, Video & CamcordersThe RAP-B-366U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a round plate with...

Composite 3.25" Diameter Suction Cup Base w/1" BallThe RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball...

RAM Composite Double Socket Arm f/1" Ball BasesPart #: RAP-B-201UStandard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end...

Composite Double Socket Swivel ArmThe RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber...

RAM Composite Short Double Socket Arm f/1" Ball BasesPart #: RAP-B-201U-AShort double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the...

Description:The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball...

Description:The RAP-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball...

RAM Composite Twist Lock Suction Cup Mount w/ Diamond AdapterDescription:The RAP-B-166-2U consists of a 2.75" suction cup twist lock base, double socket arm and diamond base adapter. The suction cup...

The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains...

RAM Cradle Holder for Garmin Montana® SeriesThis RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana...

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ WrenchThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3"...

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68"...

D Size 2.25" Ball on Round Plate with AMPS Hole PatternThe RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled...

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and...

RAM 2-7/16" X 1-5/16" Base w/BallPart #: RAM-238UThe powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The...

RAM Double 1" Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center...

RAM Double 1-1/2" Ball AdapterPart #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade...

Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At...

RAM 2.5" Round Base w/Post & 2 1" BallsColor: Black Powder CoatMaterial: Powder Coated Marine Grade AluminumBall Size: 1" Rubber Ball Manufacturer : RAM Mounting Systems Manufacturer Part No :...

Double Socket Arm with Two 2.5 Inch Round BasesThe RAM-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1...

RAM 1.5" Diameter Ball Mount with 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-2461 consists of a double socket arm, 2.5" diameter round base...

RAM Short Double Socket Arm with Jam Nut for 2.25" Ball BasesPart #: RAM-D-201U-C-MI1The RAM-D-201U-C-MI1, short double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball...

RAM Double Socket Swivel Arm for 1" Ball BasesThe RAP-B-200-2U consists of double 1" diameter open ball sockets with a 360 degree rotation point at the center and a connecting swivel joint that...

RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern)DescriptionThe RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will...

RAM Double Swing Arm w/4" Male & No Female Tele-PoleSwing Arm connects to a 75mm x 75mm VESA Plate. Manufacturer : RAM Mounting Systems Manufacturer Part No : RAM-VP-SW1-4-2461 UPC : 793442926051

RAM Double Swing Arm w/4" Male and No Female Tele-PoleSwing Arm Connects to a Laptop Tray. Manufacturer : RAM Mounting Systems Manufacturer Part No : RAM-VP-SW1-4-234-3 UPC : 793442925894