Raceface

• Compatible with SRAM cranksets with a removable Spider • Narrow Wide tooth profiling ensures ultimate chain retention • 7075-T6 aluminum, aerospace grade strength • Stiff 4mm plate thickness to...

• Manufactured from 2014 Aluminium • 35 optimized profile design • Extra control with 780mm width • Stealth black on black decals to match every frame color

• Forged 7050 AL gives this crank phenomenal strength, earning it an Enduro rating at light weight • E-bike crankset • Impressive strength to weight ratio • Black satin finish • CINCH direct mount...

• The Aeffect R 1X Seatpost Lever delivers big time hassle-free height control. • Designed to illuminate any excess bells and whistles that might fail, this lever gets the job done so you can focus...

• Offset nipple bed for improved spoke tension balance and wheel strength/stiffness • Tubeless ready, strong tire retention bead • 6069 Alloy

• Redesigned for 2022 • Wider, thinner and more durable than previous generation • 10 adjustable bottom-loading pins • Fully serviceable without custom tooling • 6061 alloy • 20x pins/pedal • 110mm x...

• Very strong, very stiff • DH, Freeride, Enduro, Dirt-jump strength • 7075 alloy • CINCH direct mount • Boost 136 spindle

• Very strong, very stiff • DH, Freeride, Enduro, Dirt-jump strength • 7075 alloy • CINCH direct mount • 183mm DH spindle • • • For 83mm bottom bracket frames

• Four bolt bar clamp holds bar securely in position • Interlocking Faceplate design transfers load through stem, not to bolts • Designed for All-Mountain, Enduro, Freeride and DH • 40mm stack • 155g...

• Extend the life of your Atlas pedals • Bearing rebuild kit • For current generation Atlas pedals (PD22ATLAS***)

• Forged and blasted 2014 aluminum for high strength and fatigue resistance • 4-bolt bar clamp • Interlocking U-Shaped clamp geometry transfers more load through stem body and not the bolts •...

• Forged and machined from 6061 aluminum • Interlocking 4-bolt bar clamp secures your bar and distributes loads away from bolts and into the body • 42mm stack height

• For use with DH width (83mm) cranksets • Standard 6806 retainer bearings • Bearings are external to the BB shell resulting in a stiffer widerstance • Bearings are factory filled with Phil wood...

• Optimized Pedal Stroke • 1x Drivetrain Variable Width Tooth Profile Stops Dropped Chains • Super Boost Compatible • 10//11/12 Speed Compatible • Wear resistant 7075 Aluminium • Compatible with all...

• Pedal end boots protect crank arms • Wrap it up and protect the tips! • Fits: Next/Next SL/Next SL Cinch

• The strongest, stiffest and most durable carbon crankever created by Race Face • Stainless steel wear plate guards against the damage caused by footwear friction while adding additional impact...

• Single lock on grip • Super slim low profile design • Lightweight • Uses Raceface's soft and durable super tacky VEXY • Raceface MX style half waffle for added grip security compound • Topographic...

• Removable D3O® T4 Trio foam pad provides impact protection. • Mesh sleeve fabric for breathability and comfort. • Silicone gripper plus hook and loop strap closure fora secure fit. •...

• Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. • Removable D3O® LP1 foam pad provides certified impact protection. • Lycra...

• Angled clamp bolts allow easy tool access for hassle free adjustment and tightening • 6deg ? and 12deg ? saddle adjustment range • Wide lower cradle gives extra rail support for lightweight saddle...

• One of the lightest cranksets in the world • 136mm spindle provides ample chainstay clearance and functionality • XC and trail rated • Precise power transfer • Crank boot included • 428g (170mm...

• To use 24mm spindle cranksets in 46mm OD (PF30) BB shells • Standard 6806 retainer bearings • Bearings are external to the BB shell resulting in a stiffer widerstance • Bearings are factory filled...

• The softest, tackiest, most advanced grip ever from RaceFace, all with a bit of Chester’s signature style. • Increased thickness of 20A Durometer rubber under the palm means more ride comfort and...

• Tough nylon composite pedal body with added traction treads. • Slim, lightweight platform with a concave shape. • 18 Molded pins per pedal add grip without risking your shins or shoes. • Durable...

• Two bolt design for easy adjustment while holding rails securely • Low profile clamps reduce stress on light-weight rails • The 3D forged 6061 heat-treated aluminum tube is anodized and shot peened...

• Slide on design with Ariaprene cuff for enhanced breathability and secure fit. • High density prints on knuckles for added durability. • Reinforced thumb gusset. • Silicone gripper finger print. •...

• A Kydex pierce-proof layer and a removable D3O® LP1 pad provide certified impact protection. • Durable TPU skid plate for sliding during crashes along with a ripstop knee cover for abrasion...

• Custom diecut removable D3O® XTI Mesh foam pad provides impact protection. • Mesh sleeve fabric for breathability and comfort. • Silicone gripper plus hook and loop strap closure for a secure fit...

• 5cm wide soft stretch elastic belt. • 3D mesh backing provides comfort around 3/4 of your body. • Main pocket folds out to make a tool bench for trailside repairs. • Large inside pocket keeps...

• 5cm wide soft stretch elastic belt. • 3D mesh backing provides comfort around 3/4 of your body • Two storage pockets hold key essentials. • Neoprene bottle sleeve with mesh base keeps a tight grip...

• Tri-fold design for secure storage. • Holds CO2, a small selection of tools and a tube.

• Designed to be used with X-Type or EXI cranksets • High strength aluminum and custom retainer bearings • Compatible with various Shimano and FSA external BB systems • 95 grams

• Tool to install Cinch BSA30 cups

• Smooth single piece perforated Amara palm. • Ribbed lycra on back of hand for stretch and comfort. • Expansion gusset on wrist accommodate varying wrist sizes. • Highly absorbent terry thumb panel.

• Durable high gloss finish. • Deep pocket forged and CNC machined to optimize stiffness • 30mm spline interface • CNC machined from 7050 alloy • CINCH direct-mount or 2x + with CINCH spider (not...

• Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop

• Fitting nicely under your bar Turbine R 1x seatpost lever may just become your thumb's new best friend. • Made strong, this lever works flawlessly and requires less force to actuate it. Optimized...

• Compatible with 2x setups • Made from forged and machined 6061-T6 Aluminum for high strength and light weight • Textured non-slip thumb pad for not slipping thumbs • Optimized for Raceface Turbine...

• XC - Gravel - Trail focused post • Two-position simplicity • Featherweight • Cable routes in either direction for compatibility with any dropper lever • Zero offset • 352g

• An oversized hub shell increases torsional and lateral stiffness • 6902 bearings for maximum durability • Wide bearing placement was designed to decrease load on the bearings • Low-drag labyrinth...