Spoke Wrenches and Tools

• 1751/2DT screwdriver is used for DT Swiss® SQUORX nipples with torx shaped top head. The 80mm long stem enables work with deep aero rims as well as with all the normal rims.

• Unior’s 1689.6 Lefty adaptor is used for truing Cannondale’s Lefty® front wheels, which have specific asymmetric shape and dimension and therefore cannot be used on the centering stand with normal adaptors.

• A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.

• With the Velcro strap the tool can be mounted to any front fork and rear seat stay of the frame • The indicator is then used normally as on other truing stands. The tool can be also used for truing rotors • Light and small and easily fits in any...

• Professional wheel centering stand arm can get out of center after being used frequently. Controlling caliper arm enables us, to calibrate the stand arm back to its center position.

• Accepts wheels from 16 to 29 inch with or without tire • Supports hubs up to 157 mm width. Truing of 20 mm or other dimension axle wheels requires additional adaptors. • The calipers enable simultaneous radial control of the wheel position on both...

• Spoke wrenches are designed to tighten nipples with flat diameter 3.3 mm to 3.45 mm

• The smaller end is used for nipples with a 6.4mm outside diameter, while the larger end is used for assembling and disassembling for tubeless Mavic rim inserts.

• Threading nipples to the spokes is the most time consuming part of building wheels. Thanks to the speed nipple bit you can now do it with the cordless screwdriver, save yourself some time and still have all the nipples threaded on the spokes to the...

• A handy tool to prevent spoke windup when working with bladed spokes • Slots from 1.0mm-2.2mm for most spoke sizes

• The spoke wrench is designed to tighten nipples with flat diameters of 3.3mm